Heidenhain: Incremental Length Gauges METRO series MT 60M (ID: 359341-01)

Length gauges from HEIDENHAIN offer high accuracy over the entire measuring range, are mechanically rugged, and can be used in a great variety of applications.

They have a wide range of applications in production metrology, in multipoint inspection stations, measuring equipment monitoring, and as position measuring devices.

Robust Design

HEIDENHAIN length gauges are built for an industrial environment. They feature consistently high accuracy over a long period of time as well as high thermal stability. They can therefore be used in production equipment and machines.

High Accuracy

The high accuracy specified for HEIDENHAIN length gauges applies over the entire measuring length. Whether the part measures 10 mm or 100 mm, its actual dimension is always measured with the same high quality. The high repeatability of HEIDENHAIN length gauges comes into play during comparative measurements, for example in series production.

Large Measuring Ranges

HEIDENHAIN length gauges are available with measuring ranges from 12 mm to 100 mm, so that you can measure very different parts in one measuring setup and avoid frequently changing setups with expensive gauge blocks or masters.

The HEIDENHAIN METRO MT60M series length gauges are designed for measuring stations and multi-gauging fixtures with a motorized ball-bearing plunger reading DIADUR 10µm grating period glass.

METRO Series

METRO MT 60M Features:

• 60mm plunger travel
• 1µm accuracy level
• 10µm signal period
• Single reference mark
• ≥ 0.5N radial force
• Ball-bearing-guided and zero-backlash plunger
• Operating temperature: 10°C to 40°C
• 11 µApp signal
• Protection rating of up to IP50
• 1.5 meter cable with either DB15 or M23 9 pin connector
• Used with the SG60M switch box to raise and lower the plunger

Model No.: MT 60M
ID: 359341-01 (in stock)

MT 60M (ID: 359341-01)

Incremental length gauge HEIDENHAIN-METRO
Plunger actuation:      With motor
Measuring length:       60 mm
Reference mark position:1.7 mm
Accuracy grade:         0.5 µm
Electrical connection:  Connector M23, male, 9-pin
Pin configuration:      D295051
Cable type:             PUR Ø 4.5 mm
Cable length:           1.50
Length of additional    
cable:                  1.50 m
Output signal:          sinusoidal current signals
                        (11 µApp)
Grating period:         10.000 µm
Power supply:           5V+-5%
Degree of protection:   IP50 (EN60529)
Operating temperature:  +10/+40 °C