Home > Controller > Motion Controller+Drive > Phytron
Sort By:
Page of 1
Phytron: Stepper Motor Controller (MCC-2 Series) Phytron: Stepper Motor Controller (MCC-2 Series)

Phytron: Stepper Motor Controller (MCC-2 Series)

Programmable controller for two axes.


The MCC-2,
phytron´s freely programmable dual axis stepper motor controller, is a compact stand-alone unit (CPU, Indexer and power stage) for 2 phase stepper motors providing up to 3.5 APEAK phase current.


Controllers in the MCC series have many inputs and outputs (digital and analog) and encoder inputs for step position monitoring plus possibilities to connect limit switches all as standard.


Due to the
variety of available host interfaces (Ethernet, Profibus, USB etc.), the MCC can be quickly and easily integrated into existing applications.


This controller is easy to program and can operate either directly (remote) via its host interface or stand-alone (local) with the program routines stored within.


As a compact stand-alone device, it convinces
especially in small experimental setups, machines and equipment, which can be dispensed in a PLC.


Technical Details

  • Programmable 2-axis stepper motor controller for stand-alone operation.
  • Bipolar control of 2-phase stepper motors
  • Phase currents up to 3.5 APEAK
  • Supply voltage 24 to 48 VDC
  • Step resolution up to 1/256 step
  • USB, RS 485, RS 232 or Ethernet interface
  • Programming in the well-tried MiniLog format and acc. to DIN 66025
  • 2 analog inputs, e. g. for joystick
  • 8 digital inputs / 8 digital outputs, electrically isolated
  • Encoder evaluation
  • Redundant designed hardware input for enabling the motors
  • Compact design, size 127 x 72 x 110 mm
  • Wall mounting bracket for different mounting positions
  • DIN rail mounting kit


Available M
odels

  • USB or RS 232 interface for PC connection
  • RS 485-4-wire interfaces for PC (RS 422) connection and bus operation
  • Ethernet interface for integration into the firm's network
  • Attached USB converter for PC connection and RS 485 bus operation
  • Attached terminal adaptor for BT 5 AM operator terminal
  • DIN rail or wall mounting

.
Phytron: Stepper Motor Controller (MCC-1 Series) Phytron: Stepper Motor Controller (MCC-1 Series)

Phytron: Stepper Motor Controller (MCC-1 Series)

Programmable controller for one axis.


The MCC-1,
phytron‘s freely programmable dual axis stepper motor controller, is a compact stand-alone unit for 2 phase stepper motors providing up to 3.5 APEAK phase current.


Controllers in the MCC series have many inputs and outputs (digital and analogue) and encoder inputs for step position monitoring plus possibilities to connect limit switches all as standard.


Due to the
variety of available host interfaces (USB, Ethernet etc.), the MCC can be quickly and easily integrated into existing applications.


This controller is easy to program and can operate either directly (remote) via its bus or stand-alone (local) with the program routines stored within.


As a compact stand-alone device, it convinces
especially in small experimental setups, machines and equipment, which can be dispensed in a PLC.


Technical Details

  • Freely programmable one-axis stepper motor controller for stand-alone operation.
  • Bipolar control of 2-phase stepper motors
  • Step resolution up to 1/256 step
  • RS 485, RS 232, USB or Ethernet interface
  • Programming in the well-tried MiniLog format and acc. to DIN 66025
  • Analog input e. g. for joystick
  • 8 bidirectional digital inputs/outputs, electrically isolated
  • Redundant designed hardware input for enabling the motor
  • Encoder evaluation
  • Compact design, size: 127 x 55 x 110 mm only
  • Wall mounting bracket for different mounting positions
  • DIN rail mounting kit
  • Supply voltage 24 to 48 VDC
  • Phase currents up to 3.5 APEAK


Available M
odels

  • USB or RS 232 interface for PC connection
  • RS 485-4-wire interfaces for PC (RS 422) connection and bus operation
  • Ethernet interface for integration into the firm's network
  • Attached USB converter for PC connection and RS 485 for bus operation
  • Attached terminal adaptor for BT 5 AM operator terminal
  • DIN rail or wall mounting

.
Phytron: Stepper Motor Controller (MCC-2 LIN Series) Phytron: Stepper Motor Controller (MCC-2 LIN Series)

Phytron: Stepper Motor Controller (MCC-2 LIN Series)

Linear controller for two axes.


The MCC-2 LIN,
phytron´s freely programmable dual axis stepper motor controller, is a compact stand-alone unit (CPU, Indexer and power stage) for 2 phase stepper motors providing up to 1.7 APEAK phase current.


Controllers in the MCC series have many inputs and outputs (digital and analogue) and encoder inputs for step position monitoring plus possibilities to connect limit switches all as standard.


Due to the
variety of available host interfaces (USB, Ethernet etc.), the MCC can be quickly and easily integrated into existing applications.


This controller is easy to program and can operate either directly (remote) via its bus or stand alone (local) with the program routines stored within.


As a compact stand-alone device, it convinces
especially in small experimental setups, machines and equipment, which can be dispensed in a PLC.


Technical Details

  • Freely programmable 2-axes stepper motor controller.
  • Linear power stages
  • Best fit for extremely fine positioning and EMC-sensitive environments.
  • Step resolution up to 1/256 step
  • USB, RS 485, RS 232 or Ethernet interface
  • Programming in the well-proven MiniLog format and acc. to DIN 66025
  • 2 analog inputs, e. g. for joystick
  • 8 digital inputs / 8 digital outputs, electrically isolated
  • Encoder evaluation
  • Redundant designed hardware input for enabling the motors.
  • Compact design: 127 x 108 x 110 mm
  • Wall and DIN-rail mounting
  • Supply voltage 24 to 48 VDC
  • Phase currents up to 1.7 APEAK


Available M
odels

  • USB or RS 232 interface for PC connection
  • RS 485-4-wire interfaces for PC (RS 422) connection and bus operation.
  • Ethernet interface for integration into the firm's network
  • Attached terminal adaptor for BT 5 AM operator terminal
  • DIN rail or wall mounting

.
Phytron: Stepper Motor Power Stage (ZMX+ Series) Phytron: Stepper Motor Power Stage (ZMX+ Series)

Phytron: Stepper Motor Power Stage (ZMX+ Series)

Stepper motor power stage with ServiceBus.


The ZMX+ is a plug-in stepper motor power stage for 19“ sub-racks with ServiceBus for motor currents up to 9 APEAK.

Due to improved design and greatly reduced power dissipation, the ZMX+ provides reliable high-precision performance with minimized heat emission.

Parameters can be manually set by switches. The ServiceBus interface allows several additional adjustments.

The ZMX+ is used in different fields of application: e.g. in inspection and test applications, labelling or packaging machines, in equipment manufacturing or in beamlines.

The ZMX+ version with a 32 pin VG connector is pin compatible with commercially available power stages. The optional ServiceBus connector is placed at the front.

Technical Details

  • 19'' stepper motor power stage for bipolar control of 2-phase stepper motors.
  • The 32-pin connector model is pin-compatible with standard power stages on the market (e.g. DSR 92-70) and has the same functions.
  • Step resolution: Full step to 1/20 step (setting switch mode); up to 1/512 in the ServiceBus mode.
  • Operation parameter setting: manual or online via ServiceBus
  • Design for simple mounting in 19" racks 3 U / 5 HP
  • Easy configuration by software ServiceBusComm®
  • Motor currents up to 9 APEAK
  • Supply voltage 24 to 70 VDC


Available Models

  • 32-pin or 48-pin connector
  • With or without electrical isolation
  • With or without ServiceBus (RS485)


(The model with 32-pin connector, without electrical isolation and without ServiceBus is compatible to the previous ZMX)

.
Phytron: Stepper Motor Power Stage (MCD+ Series) Phytron: Stepper Motor Power Stage (MCD+ Series)

Phytron: Stepper Motor Power Stage (MCD+ Series)

Compact stepper motor power stage with ServiceBus


The MCD+ is a bipolar power stage for driving 2 phase stepper motors. The operation parameters - phase currents, step resolution and preferential motor direction - are programmable by rotary switches or in the ServiceBus mode.

The MCD+ is designed for power supplies from 24 to 70 VDC.

The control pulse, motor direction, boost, activation and reset inputs are compatible with push-pull or open collector signals. The control inputs are electrically insulated from the supply and motor voltage.

A special feature of the MCD+ offers 3 terminals for each signal input. Thus separate input terminals for 5 V and 24 V are available.

The MCD+ is suitable for up to 450 Watts of shaft power that is ideal for controlling spindle and toothed belt drive systems for mechanical handling or assembly applications. The high step resolution makes the MCD+ the best solution for applications that have especially high demands on precision, smoothness and durability.


Technical Details

  • Mini step and micro step power stage for bipolar control of 2-phase stepper motors.
  • Parameterization via setting switches or ServiceBus
  • Setting switch mode: phase current setting in 15 stages,
    step resolution up to 1/20 step.
  • Free Phytron PC software ServiceBus-Comm for Windows®
  • ServiceBus mode: phase current setting in 100 mA increments,
    step resolution up to 1/512 step.
  • Electrically isolated inputs and outputs
  • Status LED
  • Compact design – 127 x 37 x 110 mm only
  • Wall mounting bracket for different mounting positions.
  • Removable DIN-rail clip
  • Phase currents up to 9 APEAK / 24 to 70 VDC

.
Phytron: Stand-Alone Controls (OMC/TMC Series) Phytron: Stand-Alone Controls (OMC/TMC Series)

Phytron: Stand-Alone Controls (OMC/TMC Series)

Compact Stand-alone Controls for 1 or 2 axes and Multi-Axis Systems up to 30 Axes.


The intelligent motion controllers OMC and TMC are small, simple and compact stepper motor control units for 2-phase stepper motors up to 9 Apeak phase currents with 70 V motor PEAK voltage. The connection of external power stages allows to connect larger stepper motors e. g. 17 Apeak at 140 V motor voltage. The controllers are applicable for more complex processes and motion sequences because of the circular interpolation and changes of frequency and target position during the run.


OMC offers 16 inputs, which are electrically isolated from the controller board, and 8 overload protected outputs. TMC has 32 inputs and 16 outputs. Two signal inputs are available for each axis to connect the limit switches.
The controllers can be supplied from 24 up to 70 VDC or 17 up to 50 VAC . OMC and TMC are designed for DIN rail or OMC/TMC are programmed in the well-tried MiniLog format. The user-friendly MiniLog-Comm® , Windows® PC software for configuration and programming, is included in delivery.


A Remote/Local switch makes it possible to start and execute the saved program routines without connection to the superior control. Each OMC or TMC control unit can be used in single or multi-axis mode.


Stand-alone mode for single devices.

The controller is able to execute program sequences without connection to PC.


Stand-alone multi-axis mode.

Up to 30 axes can be simultaneously operated by PC: RS 422/RS 485-4-wire bus mode.


Master-slave mode.

The connector with the address ‘0’ is defined as master. The instructions are sent from the PC to the master and from the master to the slave controllers (up to 8 axes).


Technical Details

  • Programmable stepper motor controller for 1 or 2 axes

  • Bipolar control of 2-phase stepper motors

  • Phase currents up to 9 APEAK

  • Supply voltage 50 VAC to 70 VDC

  • Step resolution up to 1/20 step

  • RS 232 or RS 485 interface

  • Programming in the well-tried MINILOG format

  • Analog inputs e. g. for joystick

  • SFI step failure indication

  • Incremental or absolute encoders can be connected

  • 16 digital inputs / 8 digital outputs per axis

  • Interface for the BT5 AM operator panel

  • Compact design for DIN rail or wall mounting

  • New: Linear and circular interpolation of two axes

  • New: Change of frequency and target position during operation

  • New: ProfiBus interface - GSD-file

Available Models

  • 1 or 2 axes controller

  • Built-in power stages or optional connection of external power stages

  • RS 232 or RS 485 interface

  • Additional boards (for 1 or 2 axes): step failure indication SFI or AD converter

  • With mounted fans

  • DIN rail or wall mounting kit

.