Home > AllMotion > Servo > Accessories
Sort By:
Page of 1
AllMotion: Stepper/Servo Accessories (24 AWG Wire) AllMotion: Stepper/Servo Accessories (EZENC17 Series) AllMotion: Stepper/Servo Accessories (EZBUSSTN Series)

Accessory: 24 AWG Wire with Crimp Pin

Pre-crimped 8 inch wire in 4 different colors

Options:

  • Part #: 73-0100-0 (Black)
  • Part #: 73-0100-2 (Red)
  • Part #: 73-0100-4 (Yellow)
  • Part #: 73-0100-9 (White)

Accessories: EZENC17

Features:

  • EZENC17: 3 Hole Enclosure provides an easy method for mounting your EZ17 and EZHR17 to a NEMA size 17 Stepper Motor.
  • EZENC17EN: 4 Hole Enclosure provides an easy method for mounting your EZHR17EN to a NEMA size 17 Stepper Motor.
  • EZENC17/EZENC17EN: also protects the EZSteppers in applications where the controller is mounted remotely from the motor.

Accessory: EZBus Station

Features:

  • Allows easy daisy-chaining of 4Wire (power + communication) connectors
  • Each EZ Bus Station will allow three Drives to be attached to one incoming 4 wire bus
  • Will also allow 2 Drives to be attached plus one Bus cable to continue on to another Daisy-Chaining point.
  • The connections are one to one for the four wires
AllMotion: Stepper/Servo Accessories (RS485 Series) AllMotion: Stepper/Servo Accessories (USB485 Series)

Accessory: RS485

Features:

  • Customized to combine power wires with serial data from a standard DB9 serial connector and send it to a 4 pin connector that has same pin-out as the EZStepper 4 wire bus.
  • Converter operates from 12V to 40V.

Accessory: USB485

Features:

  • The RS-485 bus protocol allows for multiple devices to communicate on a Bidirectional Bus with a master RS232 Controller such as a PC COM port.
  • Customized to combine the power wires with the serial data from a standard USB connector and send it to a 4 pin connector that has the same pin-out as the EZStepper 4 wire bus.
  • This converter operates from 12V to 40V.