GLENTEK : GM3310-25 Servo Motor GM3310-25-02001000

To accommodate your complete servo system requirements, Glentek manufactures two complete series (GM and GMR) of high performance, permanent magnet DC brush servo motors.

GM SERIES
The GM series utilize traditional ferrite magnets, which are ideal for cost sensitive applications. In addition, the higher inertia armatures provide improved motor to load inertia matching for medium to high inertia loads. This helps to reduce the mechanical shaft resonance, which allows higher servo gains with increased stability. All frame sizes incorporate skewed armatures, which provide ultra smooth operation (i.e. low cogging torque) at all speeds.
• Continuous Torque Range:1.9 Lb-in (0.21 Nm) to 113 Lb-in (12.8 Nm)
• Peak Torque Range:12.0 Lb-in (1.4 Nm) to 338 Lb-in (38.1 Nm)

GM series DC brush servo motors utilize traditional ferrite magnets, which are ideal for cost sensitive applications. In addition, the higher inertia armatures provide improved motor to load inertia matching for medium to high inertia loads. This helps to reduce the mechanical shaft resonance, which allows higher servo gains with increased stability. All frame sizes incorporate skewed armatures, which provide ultra smooth operation (i.e. low cogging torque) at all speeds.

Glentek’s DC brush servo motor line features high performance, skewed armatures, and TENV construction. Industry standard mounting, feedback, sealing, and lead termination options available, along with optional fail safe brakes.

Glentek’s GM series of high performance, permanent magnet DC brush servo motors utilize traditional ferrite magnets, which are ideal for cost sensitive applications. In addition, the higher inertia armatures provide improved motor to load inertia matching for medium to high inertia loads.

GM3300 SERIES
Glentek’s GM3300 series of high performance, permanent magnet DC brush servo motors utilize traditional ferrite magnets, which are ideal for cost sensitive applications. In addition, the higher inertia armatures provide improved motor to load inertia matching for medium to high inertia loads. This helps to reduce the mechanical shaft resonance, which allows higher servo gains with increased stability. These motors incorporate skewed armatures, which provide ultra smooth operation (i.e.low cogging torque) at all speeds.
• Continuous Torque Range: 4.4 Lb-in (0.5 Nm) to 10.6 Lb-in (1.2 Nm)
• Peak Torque Range: 22.0 Lb-in (2.5 Nm) to 53.0 Lb-in (5.99 Nm)

The GM3310-25 permanent magnet brush servo motor uses traditional ferrite magnets, which are ideal for cost sensitive applications. It also uses higher inertia armatures, which provide improved motor to load inertia matching for medium to high inertia loads. This helps reduce mechanical shaft resonance and leads to higher servo gains for increased stability. In addition, this motor incorporates a skewed armatures, which provides low cogging torque and ultra smooth operation at all speeds. The GM3310-25 outputs up to 4.4 Lb-in (0.5 Nm) of continuous torque, and has a maximum speed of 3400 RPM. Industry standard English, metric, and NEMA mounting configurations are available.