Search
Categories

  Home > Motors >

JVL: IP55 Rated Integrated Servo Motor with Brake MAC800-D5
JVL: IP55 Rated Integrated Servo Motor with Brake MAC800-D5


 

Price : $5,069.00

Price with Selected Options: $5,069.00


Availability: Usually Ships in 4 to 6 Weeks
Order #: MAC800-D5

Module

MAC00-EW4: Wireless WLAN Module [Add $1,679.00]

Qty:  
Description Specifications and Drawings
 

JVL: IP55 Rated Integrated Servo Motor with Brake MAC800-D5

MAC800 - Integrated Servo Motors

MAC800 - The complete solution for larger power ratings.

All with built-in mains power supply. Choose between model with or without brake. Also in IP66 version. Choose Expansion module from the extensive selection for any application.

Motor size is:

  • MAC800-D2: 746W

  • MAC800-D5 (with built-in brake): 746W

Expansion module you can choose between:

  • Basic Modules

  • Programmable Modules

  • Fieldbus Modules

  • High Speed Multi-Axis Modules

  • Wireless Modules

Model No.: MAC800-D5, MAC00-EW4

Details:

  • Rated Output @ 3000RPM: 750W
  • Rated Torque: 2.38Nm / 337.042 oz-in
  • Peak Torque: 6.8Nm / 962.96 oz-in
  • Inertia: 0.91 kgcm2 / 0.01289 oz-in-s2
  • Length: 209mm
  • Full Torque Speed Range: 0-3000 RPM
  • Max Speed: 3500 RPM IP55


Wireless WLAN Module MAC00-EW4
Wireless with M12 connectors.
  • Gives full access to all functions and registers of the MAC motor.
  • Connection of thousands of modules possible
  • Baud rates up to 19200.
  • Remote control of the motor.
  • 5 in- and 4 outputs
  • Programmable via wireless control with MacTalk
  • M12 connectors
This module can be wireless set-up and programmed from a PC or IPC via a COM port. There are 5 in- and 4 outputs for home or limit switch sensors. Programming is done exactly as with the MAC00-Rx nanoPLC module, where advanced programs with arithmetic functions can be programmed from MacTalk. With a special mirror mode it is possible to have an input on one wireless module mirrored to an output on another wireless module without any programming. Typical application can be where a motors is moving around and therefore need power, sensor signals and communication through a slip ring. Other application could be where the control signals come from battery powered, hand-held equipment and a cable therefore can not be used.

Share your knowledge of this product. Be the first to write a review »