Mitsubishi Servo Drive Unit-MDS-C1-V1-70

MITSUBISHI Servo drive unit MDS-C1-V1-70 1 axis type MDS with power 7kW and fitted with MITSUBISHI HA Servo motors of CNC Machine-tools.The characteristics of this servo drive type MITSUBISHI MELDAS MDS-C1-V1-70 are:
Rated input :- DC270-310V 35A (Input rating)

AC200/200-230V 50/60HZ 0.2A

Rated output :- 33.5A 7kW

This MITSUBISHI ELECTRIC MDS-C1-V1-70 servo drive unit 1 axis is ready to replace your defective or faulty rive installed in your precision CNC Machine-tools.Each MITSUBISHI Electric MDS Servo drive unit is installed into a sealed cabinet structure as a standard. Consider each unit's heat radiation and wiring, and secure enough space for ventilation while referring to the drawing. MITSUBISHI ELECTRIC MDS-C1-V1-70 MDSBV170.
The MDS-C1-V1/V2 servo drive unit has a function to D/A output the various control data. The servo adjustment data required for setting the servo parameters to match the machine can be D/A output. Measure using a hi-coder, oscilloscope, etc.
With the MDS-C1-V1/V2 Series, control is possible with the standard servo (MDS-B-V1/V2) control mode and high-gain servo (MDS-B-V14/V24) control mode. When replacing an older model (MDS-B Series) with this series, the servo parameter settings are automatically recognized and the control mode is determined. Thus, the model can be changed from either a standard servo or high-gain servo without changing the servo parameters. When using the MDS-C1-V1/V2 unit and newly adjusting the machine, select the high-gain specifications. The high-gain specifications are set as the default.