Home > Drives > Analog PWM DC Brush Drive > MotiCont
Sort By:
Page of 1
MotiCont: DC Servo Motor Driver (710-01 Series)

MotiCont: DC Servo Motor Driver (710-01 Series)

The 700 series is a high performance, cost effective Servo Motor Driver to implement intelligent Motion Control. The driver incorporates an advanced architecture and surface mount technology to achieve an exceptional power density.

Features:

  • Runs DC Servos With Step And Direction Control Inputs

  • +18 VDC to +80 VDC Power Supply

  • PID Closed Loop Operation

  • Quadrature Encoder Feedback

  • Quadrature Encoder Feedback

  • Anti-Dithering Circuit Keeps Motor Silent

  • +5VDC, 50 ma Encoder Supply

  • Pulse By Pulse Motor Current Limiting

  • Small Size: 2.5" X 2.5" X 0.82" (63 mm X 63 mm X 21 mm)

  • No Tachometer Feedback Needed

  • 20 Amp Motor Output

  • 0 to 300 KHz Step Rate

  • Latched Fault Protection

  • 0 C to 70 C Operating Temperature

  • LED Fault Indicator

  • Light: 3.6 Oz (100 gm)

  • Anodized Aluminum Package

  • Modular 2-Piece Main Connector

  • 0 to 20 Amp Current Limit Adjust Range

  • 25 KHz PWM Frequency


Electrical Specifications:

  • Supply Voltage: +18 VDC to +80 VDC

  • Phase Current: 0 to 20 Amps

  • Step Frequency: 0 to 300 kHz

  • Minimum Load Inductance: 1 mH


Mechanical Specifications:

  • Weight: 3.6 oz. (100 gm)

  • Dimensions: 2.5”W, 2.5”D, .85”H (63.5 mm, 63.5 mm, 21.5 mm)

  • Mounting Pattern: Four 6-32 screws, 1.75” by 2.375” (44.5 mm, 60 mm)

MotiCont: Voice Coil Motor Driver with PWM Input (800 Series)

The 800 series is a high performance, cost effective DC Motor Driver that implements intelligent Motion Control. The driver incorporates surface mount technology to achieve exceptional power density.

MotiCont: Voice Coil Motor Driver (950 Series)

MotiCont: Voice Coil Motor Driver (950 Series)

A high performance, dual channel, cost effective DC Motor Driver that implements intelligent Motion Control with analog inputs. Supplied with mounting card for easy wire connection and mounting. This driver does not accept feedback.


Features:

  • Run DC and Voice Coil Motors with PWM and Direction Control Inputs

  • Runs DC and Voice Coil Motors With Analog Signal Control Inputs

  • Runs Two Motors Simultaneously

  • 1 Amp Continuous, 3 Amps peak Motor Output per Channel

  • +6 VDC to +12 VDC Power Supply

  • 0 C to 70 C Operating Temperature

  • Light: 0.36 Oz (10 gm)

  • PWM Frequency: 9.7 KHz

  • Available with DIN Rail Mount Clips


Electrical
Specifications:

  • Supply Voltage: +6 VDC to +12 VDC

  • Phase Current: 0 to 1 Amps Continuous, 3 Amps Peak

  • PWM Frequency: 9.7kHz


Mechanical
Specifications:

  • Dimensions: 2.6" (66 mm) x 3.2" (81.3 mm)