Home > Drives > Analog PWM DC Brush/Brushless Drive
Choose a sub category:
AMC Glentek MotiCont
Sort By:
Page of 1
MotiCont: DC Brush/Brushless Servo Motor Driver (510 Series)

MotiCont: DC and Brushless Servo Motor Driver (510 Series)

The 510 series is a high performance, cost effective servo motor driver that implements intelligent motion control. The driver incorporates advanced architecture and surface mount technology to achieve exceptional power density.

Designed to drive voice coil, brush-type and brushless DC motors at a high switching frequency, as well as, receiving step & direction/analog signals from motion controllers.

Features:

  • Runs DC and Brushless Servo Motors

  • Four Quadrant Regenerative Operation

  • Space Vector Modulation (SVM) Technology

  • Fully Digital State-of-the-art Design

  • Programmable Current, Velocity and Position Loops Gain Settings

  • Fully Configurable Current, Voltage, Position Limits

  • PIDF Velocity Loop

  • PID + FF Position Loop

  • 12 Amps Motor Output

  • +20 VDC to +80 VDC Power Supply

  • Protected Against Overcurrent

  • Built-in Signal Generator, Sinusoidal, Square Wave and Triangular

  • 20 KHz PWM Frequency

  • No Tachometer Feedback Needed

  • 0 ºC to 70 ºC Operating Temperature

  • Modular 2-Piece Power, Motor, Signal Connector

Modes of Operation:

  • Current

  • Velocity

  • Position

Command Source:

  • Encoder Following

  • ±10 V Analog

  • Step and Direction

Feedback Supported:

  • Hall Effect Sensor

  • Incremental Encoder

  • ±10 V Analog

  • Auxiliary Incremental Encoder

AB25A100 AMC Anolog PWM DC Brush/Brushless Drive AB25A100

Cont. Current: 15A
Peak Current: 25A
Power Supply Voltage: 20-80 VDC

Price : $350.00
AB20A200 AMC Anolog PWM DC Brush/Brushless Drive AB20A200

Peak Current 20 A
Continuous Current 12 A
Supply Voltage 40 - 175 VDC

Price : $410.00
AB30A100 AMC: Anolog PWM DC Brush/Brushless Drive AB30A100

Cont. Current: 15A
Peak Current: 30A
Power Supply Voltage: 20-80 VDC

    Price : $450.00
    FEEDBACK SUPPORTED ▪ Hall Sensors ▪ Incremental Encoder ▪ Tachometer (±60VDC) 
 
 
 
AB30A200 AMC: Anolog PWM DC Brush/Brushless Drive AB30A200

    Peak Current 30 A
    Continuous Current 15 A
    Supply Voltage 40 - 175 VDC

    Price : $470.00
    AB30A200I AMC: Anolog PWM DC Brush/Brushless Drive AB30A200I

    Cont. Current:15A
    Peak Current: 30A
    Power Supply Voltage: 40-175 VDC

    Price : $520.00
    AB50A100 AMC: Anolog PWM DC Brush/Brushless Drive AB50A100

    Peak Current 50 A
    Continuous Current 25 A
    Supply Voltage 20 - 80 VDC

    Price : $570.00
    AB30A200AC AMC: Anolog PWM DC Brush/Brushless Drive AB30A200AC

    Peak Current 30 A
    Continuous Current 15 A
    Supply Voltage 30 - 125 VAC

    Price : $590.00
    AB50A200 AMC: Anolog PWM DC Brush/Brushless Drive AB50A200

    Peak Current 50 A
    Continuous Current 25 A
    Supply Voltage 40 - 175 VDC

    Price : $640.00
    AB50A200I AMC: Anolog PWM DC Brush/Brushless Drive AB50A200I

    Peak Current 50 A
    Continuous Current 25 A
    Supply Voltage 40 - 175 VDC

    Price : $650.00
    B30A40 AMC: Anolog PWM DC Brush/Brushless Drive B30A40

    Peak Current 30 A
    Continuous Current 15 A
    Supply Voltage 60 - 400 VDC

    Price : $650.00
    B30A40AC AMC: Anolog PWM DC Brush/Brushless Drive B30A40AC

    Peak Current 30 A
    Continuous Current 15 A
    Supply Voltage 45-265VAC

    Price : $990.00
    B060A400AC AMC: Anolog PWM DC Brush/Brushless Drive B060A400AC

    Peak Current 60 A
    Continuous Current 30 A
    AC Supply Voltage 200 - 240 VAC
    DC Supply Voltage 255 - 373 VDC

    Price : $1,750.00
    B100A400AC AMC: Anolog PWM DC Brush/Brushless Drive B100A400AC

    Peak Current 100A
    Continuous Current 50 A
    AC Supply Voltage 200 - 240 VAC
    DC Supply Voltage 255 - 373 VDC

    Price : $2,100.00