Home > Accessories >

Elmo Motion Control: Harmonica and Bassoon - Cable Kit
Elmo Motion Control: Harmonica and Bassoon - Cable Kit


 
Call for Pricing

Price Quote Form


Order #: CBL-JCA


Model Number/Code*:


.  
Description Specifications and Drawings
 

Elmo Accessories: Harmonica and Bassoon - Cable Kit (CBL/JCA Series)

Cable Kits: Each kit includes ten cables. The -5 suffix on a kit (for example, CBL-MLXFDBK-5) or on the cables indicates that the cables are 5 m long. Cables and kits that do not include a suffix are 2 m long. CBL-RJ45CAN2 is an exception: For CBL-RJ45CAN2, the 2 designates a 20 cm cable.

Main Feedback Cable: The main feedback cables are made from 24 AWG shielded twisted pair (STP) cable. There are three types of feedback cables. All three cables use a 12-pin Molex 2.0 mm pitch plug on the SimplIQ side. ƒ The General Purpose Main Feedback Cable (CBL-MLXFDBK) is open on the motor side so that it can be connected to customer-specific connectors. ƒ The Encoder Cable (CBL-MTRENC1) has a 15-pole socket on the motor side for Metronix APM-SAR, SA, SB and SC motors. ƒ The Encoder Cable (CBL-MTRENC3) has a 17-pole Amphenol socket on the motor side for Metronix APM-SE motors.

Auxiliary Feedback Cable (CBL-MLXAUX-5): The auxiliary feedback cable is a 24 AWG shielded twisted pair cable. It is connected using an 8-pin Molex plug. As described in the Auxiliary Feedback section(s) in the Harmonica and Bassoon Installation Guides, the following four options are available for auxiliary feedback: ƒ Main encoder buffered outputs ƒ Differential encoder inputs ƒ Single-ended encoder input ƒ Pulse-and-direction input.

Communication Cables: The communication cables use 26-AWG twisted pair shielded cable. They are connected using an 8-pin RJ-45 plug or, in the case of an extended Harmonica, with a special pitchfork connector. Elmo drives can communicate using the following options: ƒ RS-232, full duplex ƒ CANopen.

Motor Power Cables: There are three types of power cables: ƒ General Purpose Motor Power Cable (CBL-MTRPWR) has pin terminals on the SimplIQ drive side and is open on the motor side. ƒ CBL-MTRPWR1 has pin terminals on the SimplIQ drive side and a 4-pole socket on the motor side for Metronix APM-SAR, SA, SB and SC motors. ƒ CBL-MTRPWR2 has pin terminals on the SimplIQ drive side and a 4-pole Amphenol connector on the motor side for Metronix APM-SE motors.

Motor Power Cable (CBL-MTRPWR-5 for General Purpose Use): CBL-MTRPWR is a general purpose motor power cable. It is made from four 14-AWG shielded wires with pin terminals on the SimplIQ drive side. The other end is open so that it can be attached to a customer-specific connector.

Motor Power Cable (CBL-MTRPWR1-5 for Metronix SAR, SA, SB and SC motors): CBL-MTRPWR1 is a 24-AWG shielded cable in which each wire on the SimplIQ drive side is connected to a pin terminal, and the wires on the motor side are connected to a 4-pole socket. This cable is designed to connect the Harmonica or Bassoon drive to the Metronix APM-SAR, SA, SB and SC motors.

Motor Power Cable (CBL-MTRPWR2-5 for Metronix SE motors): CBL-MTRPWR2 is a 14-AWG shielded cable in which each wire on the SimplIQ drive side is connected to a pin terminal, and the wires on the motor side are connected to a 4-pole Amphenol connector. This cable is designed to connect the Harmonica or Bassoon drive to the Metronix APM-SE motor.

Model No.: CBL-MLX24, CBL-MLX24-5, CBL-MLXAI, CBL-MLXAI-5, CBL-MLXAUX, CBL-MLXAUX-5, CBL-MLXDI, CBL-MLXDI-5, CBL-MLXDO, CBL-MLXDO-5, CBL-MLXFDBK, CBL-MLXFDBK-5, CBL-MTRENC1, CBL-MTRENC1-5, CBL-MTRENC3, CBL-MTRENC3-5, CBL-MTRPWR, CBL-MTRPWR-5, CBL-MTRPWR1, CBL-MTRPWR1-5, CBL-MTRPWR2, CBL-MTRPWR2-5, CBL-RJ452321, CBL-RJ452321-5, CBL-RJ45CAN1, CBL-RJ45CAN1-5, CBL-RJ45CAN2, JCA-HAR11, JCA-HAR11-5


Share your knowledge of this product. Be the first to write a review »