Home > Drives >

AMC: DigiFlex® Performance™ PCB MOUNT CANopen Servo Drive Supports Universal Feedback DZCANTU-020B080
AMC: DigiFlex® Performance™ CANopen Servo Drive DZCANTU-020B080
DZCANTU-020B080


 
DigiFlex® Performance™ PCB MOUNT CANopen Servo Drive, Universal Feedback ,10A rated current,20A peak current,18 - 80VDC
Price : $574.00

Price with Selected Options: $574.00


Availability: Leadtime 26-28 weeks
Order #: DZCANTU-020B080


Accessory - Mounting Card:

The mounting card is designed to host a DZC or DZXC series DigiFlex® Performance digital servo drive. The drive plugs into the bottom side of the mounting card, providing a compact assembly with connectors and switches readily accessible. The MC1XDZC03-QD/HP1 is ideal for prototyping and integrating a DZC or DZXC series digital servo drive in your machine.

Qty:  
Description Ordering Information Specifications and Drawings
 

AMC: DigiFlex® Performance™ PCB mount CANopen Servo Drive Supports Universal Feedback DZCANTU-020B080

The DZCANTU-020B080 digital servo drive is designed to drive brushed and brushless servomotors, stepper motors, and AC induction motors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, this drive features dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.

The DZCANTU-020B080 features a CANopen interface for networking, and a USB interface for drive configuration and setup. Drive commissioning is accomplished using DriveWare® 7, available for download at www.a-m-c.com.

The DZCANTU-020B080 DigiFlex® Performance™ pcb mount servo drive offers full tuning control of all servo loops and is designed for distributed or centralized servo systems. This servo drive utilizes CANopen® communication and is commissioned with DriveWare® via a USB interface.
Specifications:

Current Continuous (A)10
Current Peak (A)20
DC Supply Voltage (VDC)18 - 80
Network CommunicationCANopen
Functional SafetySafe Torque Off (STO)
Size (mm)88.9 x 63.5 x 20.1
Weight (g)124
Downloads:
Datasheet_DZCANTU-020B080.pdf

DP PCB Mount (CANopen) (DZCANTU) HW Installation Manual
CommManual_CANopen.pdf
Product-Identification.pdf
Software Downloads:
SW_QuickReference_ACE.pdf
SW_Manual_ACE.pdf
Instructional Videos:
Commutate a brushless motor using the DriveWare® 7 Autocommutation feature
Tune the current loop on DigiFlex® Performance™ servo drives
Basic overview of DriveWare® 7 configuration software


Share your knowledge of this product. Be the first to write a review »