Elmo Accessories: Cornet - Cable Kit

Cable Kits: Several Cable Kits can be purchased from Elmo. Each contain a set of 8 cables. The -5 suffix on the kits and on the cables (CBL-DFDBK-5 for example) indicate that the cables are 5m long. Cables and kits without that suffix are 2m long (except for CBL-RJ45CAN2 which is 20cm long). Customers may purchase cables in kits, or individually in multiples of 10 each.

Communication Cables: The communication cables use 26-AWG twisted pair shielded cable. They are connected using an 8-pin RJ-45 plug. Elmo drives can communicate using the following options: ! RS-232, full duplex ! CANopen

• Analog Inputs

• Digital Inputs ("COMMITTED I/O")

• Digital Outputs ("GENERAL I/O")

• The main feedback cables are made of 24-AWG shielded cable. The feedback cable has a 15pin D-sub plug which connects to the FEEDBACK A port on the Cornet.

• The Main Feedback Cable (CBL-DFDBK) is open on the motor side so that it can be connected to customer-specific connectors.

• Encoder Cable CBL-MTRENC2 has a 15-pole socket on the motor side for Metronix APM-SAR, SA, SB and SC motors.

• Encoder Cable CBL-MTRENC4 has a 17-pole Amphenol socket on the motor side for Metronix APM-SE motors.