Home > Accessories > I/O Boards
Sort By:
Page of 1
Delta Tau: Input/Output Board (ACC-12E)

Delta Tau: Input/Output Board (ACC-12E)

The PMAC Accessory 12E is a general-purpose input/output board to the UMAC-Turbo and UMAC MACRO systems. ACC-12E provides 24 lines of optically isolated inputs and 24 lines of optically isolated high power outputs. The actual I/O reads and writes are carried out using M-variables. ACC-12E is one of the series of 3U rack I/O accessories designed to transfer data through the UMAC BUS (UBUS). The other boards in the family of MACRO I/O Accessory products include the following:

  • ACC-9E: 48 optically isolated inputs

  • ACC-10E: 48 optically isolated outputs, low power

  • ACC-11E: 24 inputs and 24 outputs, low power, all optically isolated

  • ACC-12E: 24 inputs and 24 outputs, high power, all optically isolated

  • ACC-14E: 48-bits TTL level I/O

Price : $256.00
Delta Tau: Opto-Isolated I/O Board (ACC-27 OPT2/2A)

Delta Tau: Opto-Isolated I/O Board (ACC-27 OPT2/2A)

PMAC’s Accessory 27 (ACC-27) Opto-Isolated I/O board provides eight discrete optically isolated input and eight discrete optically isolated output interfaces to the PMAC controller. This accessory may be used in addition to the standard discrete I/O provided on the PMAC through its JOPT(J5) connector and those provided with the main I/O expansion board (Accessory 14). ACC-27’s Option 2 allows direct interface to the PMAC through its JTHW (J3) connector. The external (isolated) voltage supply to this board for the eight inputs and outputs can range from 12 to 24V.

Note: No other PMAC Accessory which communicates with PMAC through its Thumbwheel Port (JTHW) may be used in conjunction with this accessory.

Accessory 27 Option 2:

(Option 1 no longer exist)

  • Option 2 uses a 26-pin Header for direct interface to the PMAC's JTHW connector.

  • Option 2A has a 25-pin DB connector for interfacing to the external I/O. Option 2B uses the 18-pin terminal block instead.

  • Option 2B is the factory default option for ACC-27 which orders a 26-pin header for the PMAC interface and the 18-pin terminal block for the I/O connections.

Connectors:

Refer to the pin out description of the connectors at the end of this manual.

  • P1 (JiSBX) iSBX connector used for Option 1 which no longer exists.

  • P2 (JTHW) (Option 2 only) is a 26-pin Header that allows the ACC-27 to be an interface with a PMAC through its JTHW connector.
    Note: Only one ACC-27 may be connected to a PMAC through this connector.

  • P3 (25-pin DB) (Option 2A only) provides the I/O connections and the external (isolated) power supply connections.

  • TB1 (18-pin Terminal Block) (Option 2B only) provides the I/O connections and the external (isolated) power supply connections.

Price : $313.00
DELTA TAU: INPUT/OUTPUT BOARD (ACC-34B)

ACC-34B
Part No.:3A0-602375-10x
Optically isolated I/O board, 64-bits total, designed for easy
connection to Opto-22 and compatible boards (See ACC-21
cables)

Price : $319.00
DELTA TAU: INPUT/OUTPUT BOARD (ACC-34AE)

ACC-34AE
(E-Motion Design and Manufacture)
32 In/Out Opto isolated I/O w/parity & Low Pass Input
Filters (64-bits total) Note: Must choose Option 1 or 2

Price : $329.00
Delta Tau: Interface Board (ACC24 PCI OPT1)

Delta Tau: Interface Board (ACC24 PCI with OPT1)

ACC-24 Servo Interface Board, PCI 4 Axis Analog +/-10V Servo Interface Breakout Board

Price : $401.67