Home > Drives > RS485 Stepping Drive > AMP
Sort By:
Page of 1
AMP: DC Microstep Drive (3540 Series) 12-42VDC AMP: DC Microstep Drive (3540 Series) 12-42VDC

AMP: DC Microstep Drive (3540 Series) 12-42VDC

Step Motor Drives

Step motor drives from Applied Motion Products offer unparalleled performance for today's modern machine builders. From the ground up these drives offer best-in-class current control for optimal smoothness and torque, robust and flexible on-board control options, and industry-standard industrial network communications.

3540i: DC Microstep Drive w/ Si Programming

The 3540i step motor drive is a programmable, microstepping, bipolar stepper drive suitable for a wide range of motion control applications. It includes an intuitive, user-friendly programming language for creating powerful indexing programs that are stored in the drive and allow the drive and motor to run stand-alone. 8 digital inputs and 3 digital outputs facilitate interfacing to other devices, such as PLCs, sensors, switches, etc.

The 3540i includes Applied Motion’s easy-to-use Si Programmer™ software for the rapid development of stand-alone motion control programs. The 3540i can also be controlled via streaming serial commands using Applied Motion’s Serial Command Language (SCL).

Features:

  • On-board indexer

  • Si programming

  • Microstepping

  • Idle current reduction

  • Programmable motor current

  • 8 user-programmable inputs

  • 3 user-programmable outputs

  • Screw terminals

3540M: DC Microstep Drive

The 3540M step motor drive is a microstepping, bipolar stepper drive for step & direction applications. There are multiple step resolutions to choose from, and custom resolutions are available for OEM applications. Step resolutions and motor current are set via on-board dip switches, and the 3540M includes an idle current reduction feature to reduce motor current to 50% at standstill. A self-test feature is also included that automatically rotates the motor 1/2 revolution back and forth, which can aid in system setup and troubleshooting. The 3540M is compatible with a variety of 2-phase stepper motors.

Features:

  • Step & direction inputs

  • Microstepping

  • Idle current reduction

  • Enable input

  • Screw terminals

  • Self test feature

3540MO: DC Microstep Drive w/ Oscilla

The 3540MO step motor drive is a microstepping, bipolar stepper drive for velocity-control applications, such as conveyors and labelers. The 3540MO steps at a fixed microstep resolution of 12,800 steps/rev with a 1.8º step motor (1/64 step). Motor speed is controlled by either on-board potentiometers or via external potentiometer wired to the drive’s analog input. Starting/stopping the motor and direction of rotation are controlled by digital inputs. The drive also includes an enable input and a digital tach output function for monitoring motor speed. The 3540MO can also be used with potentiometer-type joysticks for joystick control of the motor in both directions, forward and reverse.

Features:

  • On-board oscillator

  • Microstepping

  • Idle current reduction

  • Run/stop & direction inputs

  • Two speed ranges

  • Enable input

  • Tach output

  • On-board potentiometer

  • External speed control

Model No.: 3540i, 3540M, 3540MO

Price : $264.00
AMP: DC Microstep Drive w/ Si Programming (1240i Series) 12-42 VDC AMP: DC Microstep Drive w/ Si Programming (1240i Series) 12-42 VDC

AMP: DC Microstep Drive w/ Si Programming (1240i Series) 12-42VDC

Step Motor Drives

Step motor drives from Applied Motion Products offer unparalleled performance for today's modern machine builders. From the ground up these drives offer best-in-class current control for optimal smoothness and torque, robust and flexible on-board control options, and industry-standard industrial network communications.

1240i: DC Microstep Drive w/ Si Programming

The 1240i is a programmable step motor driver suited for a wide range of motion control applications. It includes a sophisticated controller integrated with a 48-watt microstepping amplifier.

The 1240i includes Applied Motion’s easy to use Si Programmer™ Windows software for the rapid development of stand-alone motion control programs. The 1240i can also be commanded from a host PC or PLC, using the Serial Command Language (SCL). For multi-axis applications, up to eight Applied Motion Si™ drives (stepper and servo) can be networked using a single SiNet™ Hub.

The 1240i includes eight (8) optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. Three (3) optically isolated programmable outputs can send signals to other electronic devices and activate relays.

Features:

  • Microstepping

  • Programmable motor current

  • Idle current

  • 8 user-programmable inputs

  • 3 optically isolated outputs

  • Screw terminal connectors

1240i-485: DC Microstep Drive w/ Si Programming & Encoder Input

The 1240i-485 is a step motor drive with on-board controller designed for use in applications that require streaming serial commands to one or more drives over an RS-485 serial connection. The drive provides up to 48 Watts of power to the step motor.

The 1240i-485 comes with an RS-485 port instead of the RS-232 port on the standard 1240i, enabling multiple 1240i-485 drives to be used in a multi-drop serial network in which a host PC or PLC commands the drives using SCL commands.

The 1240i-485 includes eight (8) optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. Three (3) optically isolated programmable outputs can send signals to other electronic devices and activate relays.

Note that the 1240i-485 does not support the Si Programmer™ Windows software. If your application requires stand-alone programming using Si Programmer™ see the standard 1240i drive.

Features:

  • Microstepping

  • Programmable motor current

  • Idle current

  • 8 user-programmable inputs

  • 3 optically isolated outputs

  • Screw terminal connectors

  • RS-485 port

Model No.: 1240i, 1240i-485

Price : $329.00