Home > MYCOM > NanoDrive Drivers
Sort By:
Page of 1
MYCOM: 2-Phase DC Type Stepper Drive (INS200 Series) MYCOM: 5-Phase DC Type Stepper Drive (INS500 Series) MYCOM: 5-Phase Stepper Drive (INS50 series)

INS200 Series NanoDrive Driver

2 Phase DC Type NanoDrive Stepping Driver Units

Features:

  • A compact package matching most existing motors
  • 24Vdc Power Input
  • Opto-isolated inputs and outputs
  • Auto-current down feature
  • Full Step/Half Step up to 200,000 ppr setting selection (16 selections )
  • Achieve up to 0.0018º per pulse
  • High accuracy even for fine resolution setting
  • Minimum vibration at low speed
  • Power Requirement: DC 24 V~36V±10%
  • Power Consumption: INS 200-030(≤36W), INS 200-230 (≤60W)
  • Resolution: Basic Step 1.8°
  • Operating Temperature: 0~+40°C
  • Storing Temperature: -10~+60°C
  • Weight (kg): 0.24

INS500 Series Driver

5 Phase NanoDrive DC Type Driver Units

Features:

  • Two Models
  • A compact package matching most existing motors
  • 24Vdc Supply Input
  • High Resolution possible
  • Extremely Low vibration & No Hunting problems
  • Maintains High Torque
  • Low Power consumption
  • Opto-isolated inputs and outputs
  • Auto-current down feature
  • Conforms to CE Standard
  • Power Requirement: DC24V±10%
  • Power Consumption (Watts Max): 36, 60
  • Output Current (Amps/Phase): 0.75, 1.4
  • Operating Temperature: 0~+40°C
  • Storing Temperature: -10~+60°C
  • Weight (kg): 0.27 (with cover)

INS50 series

5 Phase NanoDrive Driver

Features:

  • Extremely smooth operation
  • 115Vac or 220Vac Power Input
  • Input Voltage: AC100-120V±10
  • 500,000ppr
  • Phase Current: 1.4A, 2.8A
  • Resolution: Basic-Step (0.72°)
  • Operating Temperature: 0~+40°C
  • Weight (kg): 1.0
MYCOM: Stepper Drive (SND100 Series)

SND100 Series NanoDrive Driver

2 Phase DC Type NanoDrive Stepping Driver Units

Features:

  • Maximum resolution; 1/200,000 per revolution
  • Minimum step angle; 0.0018 degree (at 1/1000 division)
  • Selectable 16 types resolutions (Maximum 1/1000 division)
  • Same step angle with 5-phase stepping motor is driven economically depending on resolution
  • If 1mm pitch ball gear is used, each 5nm pitch control is available.
  • Even if inching feed (jogging), follow-up control is available
  • Peculiar vibration of stepping motor is depressed and driving of very low vibration is available.
  • There is no torque reduction when nano driving
  • Control module and power module are individually salable for great quantity.
  • Lower cost than half of conventional ones.
  • Dimensions: 106 x 67 x 26.6mm
  • Power Requirement: DC 24 V±10%
  • Power Consumption: ≤85W
  • Resolution: Basic Step Angle 1.8°
  • Operating Temperature: 0~+40°C
  • Storing Temperature: -10~+60°C
  • Weight (kg): 0.12