Home > Drives >

AMC: Analog PWM DC Brush Servo Drive 100A40
AMC: Analog  PWM DC Brush  Servo Drive 100A40
100A40


 
Analog PWM DC Brush Servo Drive 100A40 (50A rated current 100A peak current, 80-400VDC)
Price : $2,133.00


Availability: Leadtime 26-28 weeks
Order #: 100A40
Qty:

Description Ordering Information Specifications and Drawings
 

Analog PWM DC Brush Servo Drive 100A40

The 100A40 PWM servo drive is designed to drive brush type DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected against over-voltage, under voltage, over-current, over-heating and short-circuits across motor, ground and power leads. Furthermore, the drive can interface with digital controllers or be used stand-alone and requires only a single unregulated DC power supply. Loop gain, current limit, input gain and offset can be adjusted using 14- turn potentiometers. The offset adjusting potentiometer can also be used as an on-board input signal for testing purposes.

The 100A40 panel mount servo drive is targeted for centralized control and offers high bandwidth and quick response times.

Specifications:

Current Continuous (A)50
Current Peak (A)100
DC Supply Voltage (VDC)80 - 400
Weight (g)3410
Size (mm)235 x 183.2 x 92.4

Downloads:
Datasheet_100A40.pdf
HWManual_AnalogDrives.pdf
Product-Identification.pdf
Instructinal Videos:
Manual commutation
Axcent Current Loop tuning
Tips for Proper Wiring and Reducing EMI (Noise)


Share your knowledge of this product. Be the first to write a review »